Reimbursable Overtime Inspection Services for Meat, Poultry, and Egg Products - Revision 3
FSIS directive
12600.2
Series Type
12000 Series: Voluntary Inspection
Issue Date
Jan 27, 2023
Full Directive
- PURPOSE
This directive provides instructions to inspection program personnel (IPP) on how to determine whether overtime inspection services are to be provided and the way IPP are to provide inspection services during reimbursable overtime periods. FSIS is reissuing this directive in accordance with Sec. 730 of the Consolidated Appropriations Act, 2023, which allows FSIS to charge meat, poultry, and egg products establishments for the cost of inspection services provided outside of an establishment's approved hours of operation and for inspection services provided on Federal holidays regardless of the overtime status (i.e., regular time or overtime) of the inspectors.
KEY POINTS:- Description of activities conducted at official establishments that require inspection coverage, including during reimbursable overtime periods
- Description of activities conducted at official establishments that do not require overtime inspection coverage
- How to uniformly and equitably provide overtime services when inspecting meat, poultry, and egg products
- CANCELLATION
FSIS Directive 12,600.2, Rev. 2, Reimbursable Overtime Inspection Services for Meat, Poultry, and Egg Products, 6/4/20 - BACKGROUND
- FSIS regulations 9 CFR 307.4, 381.37, 533.5, and 590.24 provide that no operations requiring inspection shall be conducted except under the supervision of a program employee. FSIS provides these inspection services to official establishments without charge during approved hours of operation. These regulations further provide that each official establishment is to submit proposed hours of operation to the District Manager (DM) for approval.
- FSIS requires establishments, importers, and exporters to reimburse the Agency for the cost of inspection services furnished on Federal holidays and outside of approved hours of operation. The Agency, in 9 CFR 307.6, 381.39, 533.7, and 590.130, sets out the basis for billing overtime services, establishes 2 hour callback requirements, and establishes that billing is performed in quarter hour increments. Inspection services in egg products plants are considered overtime as described in 9 CFR 590.126 when operations in an official plant require the services of IPP beyond their regularly assigned tour of duty on any day or on a day outside the established schedule.
- FSIS charges the establishment and provides overtime inspection coverage during the entire time that the establishment conducts activities that require overtime inspection coverage outside of the approved hours of operation (as set out in Section IV below). FSIS may pro rate these charges when multiple establishments are operating.
- OPERATIONS OR ACTIVITIES THAT REQUIRE INSPECTION COVERAGE, INCLUDING DURING OVERTIME PERIODS
If an establishment requests inspection service outside the approved hours of operation in accordance with 9 CFR 307.4(d)(3), 381.37(d)(3) or 590.126, IPP are to provide inspection coverage during overtime periods when an establishment:- Prepares meat or poultry for packaging or for further processing into meat or poultry food products. Examples of activities that require inspection include slaughtering, boning, cutting, slicing, grinding, injecting, pumping, adding ingredients through other mechanical means, formulating, assembling, packaging or labeling meat or poultry components of meat or poultry food products;
- Processes egg products. Examples of activities that require inspection include breaking eggs or filtering, mixing, blending, pasteurizing, stabilizing, cooling, freezing or drying or packaging egg products at plants other than where noted in Section V.A.13 and 14 below;
- Requests the mark of inspection to be applied to any product. This applies whether the meat, poultry, or egg products are placed in a preprinted container that bears the mark of inspection or if the mark is applied after the products are placed in the container. Placing the products in a container that will bear the mark of inspection and applying the mark of inspection to products requires inspection coverage; or
- Marks, packages, or labels products (as required in 9 CFR 316.3(b), 381.136(a), and 590.418(b)).
- OPERATIONS OR ACTIVITIES THAT DO NOT REQUIRE INSPECTION COVERAGE DURING OVERTIME PERIODS
- IPP are not to provide overtime inspection services at establishments if the establishments will only be conducting the following types of activities during the period of operation:
- Monitoring a Critical Control Point (CCP) in their Hazard Analysis and Critical Control Point (HACCP) plan as required by 9 CFR 417.2(c)(4). For example, the establishment may monitor the cooking or chilling of any products with a continuous or handheld monitoring device;
- Conducting any form of sanitation procedure. For example, the establishment may conduct pre- operational cleaning and sanitizing of food contact surfaces required by 9 CFR 416.13(a);
- Monitoring the implementation of procedures included in the Sanitation Standard Operating Procedures (SOPs). For example, the establishment sanitation supervisor may monitor the implementation of the pre-operational cleaning procedures as required by 9 CFR 416.13(c);
NOTE: When an establishment wants to utilize all of the approved hours for production time and perform pre-op and any equipment set-up before the start of the approved hours of operation, they would need to request that IPP perform pre-op verification during overtime. When an establishment requests that IPP perform pre-op verification procedures, including when IPP observe the establishment monitoring the implementation of their pre-op procedures, before the start of the establishment's approved hours of operation, then the establishment will be charged overtime on those days that IPP perform pre-op verification activities. - Moving products, including moving and handling post-lethality exposed ready-to-eat (RTE) products, within the establishment to physically position them for further processing or storage. For example, the establishment may transfer racks loaded with products from smokehouses to the cooler or remove raw tumbled products from the tumbler into tubs. For another example, the establishment may remove whole RTE hams from racks in the cooler and place them into carts, so that they can easily be moved to each slicer for slicing. Moving the hams from the racks to the carts and moving the carts out to the production floor are positioning for further processing and do not require inspection coverage when no other process is done;
- Receiving meat or poultry, spices, or other ingredients from other establishments or warehouses;
- Applying ice to products in a box or container;
- Quartering a beef carcass to facilitate loading or making a single cut for grade determination;
- Receiving and sorting returned products produced by the official establishment as described in 9 CFR 318.3;
- Performing a verification activity as required by their HACCP plan including: the calibration of process monitoring equipment required by 9 CFR 417.4(a)(2)(i); direct observation of the monitoring procedure required by 9 CFR 417.4(a)(2)(ii); and the review of records generated and maintained in accordance with 9 CFR 417.5(a)(3) required by 9 CFR 417.4(a)(2)(iii);
- Performing pre-shipment records review as required by 9 CFR 417.5(c);
- Performing corrective actions in accordance with its HACCP plan or Sanitation SOPs that do not include any of the activities listed under Section IV above. For example, the corrective action cannot include a reconditioning procedure that involves trimming, packaging, or labeling of products;
- Collecting or testing samples of its products;
- Stabilizing and de-sugaring egg products after the enzymatic or bacterial de-sugaring process commences; and
- Heat treatment of egg products provided IPP are present at the beginning (placing the products in the hot room) and end of the heat treatment process.
- The listing is not all inclusive. If IPP have questions regarding whether a particular activity requires inspection, they are to first discuss the type of activity with their Frontline Supervisor (FLS) to determine whether the establishment is preparing, packaging or labeling products. If the FLS is unable to make the determination, IPP are to submit a question through askFSIS or contact the Policy Development Staff (PDS) at 1-800-233-3935.
- Additionally, the FLS may periodically direct IPP to verify monitoring of a CCP that occurs outside of an establishment's approved hours of operation through direct observation. FSIS will charge the establishment for the cost of the overtime service outside of the establishment's approved hours of operation. If the activity occurs at a time that is not contiguous with the inspector's tour of duty, IPP are to charge the establishment for a 2-hour call-back service as set out in 9 CFR 307.6(b). The decision will be based upon a conversation with IPP, and take into consideration the following:
- What is the degree of variability associated with the monitoring of the CCP? In other words, is a probe inserted at the same location for every oven or is an organic acid applied at a specific strength in a specific pattern at a certain pressure? If the monitoring of the CCP is consistent and uniform, the decision may be to direct IPP to verify monitoring less often during overtime coverage than if the CCP monitoring procedure is variable;
- Do IPP have the opportunity to verify the specific CCP and regulatory requirements during the approved hours of operation? For example, if the establishment always monitors a certain CCP outside the approved hours of operation, IPP would verify the monitoring of the CCP during overtime periods at some frequency. However, if IPP have the opportunity to verify the CCP during the approved hours of operations, there would be less need to verify it during overtime periods; and
- What is the history of deviation from critical limits or noncompliance for the CCP? For example, if there has not been a deviation from a critical limit, the decision may be to verify at a reduced frequency.
- Similarly, the FLS may occasionally direct IPP to verify how the establishment conducts operational Sanitation SOPs outside of an establishment's approved hours of operation through direct observation. For example, an establishment may conduct Sanitation SOP procedures during the transfer of marinated products to coolers to prevent contamination and adulteration. If needed, the FLS is to determine the frequency based upon the associated risk with the specific Sanitation SOP procedure, opportunity to verify the procedure during the approved hours of operations, and the rate of Sanitation SOP noncompliance.
- IPP are not to provide overtime inspection services at establishments if the establishments will only be conducting the following types of activities during the period of operation:
- PROVIDING INSPECTION COVERAGE FOR ESTABLISHMENTS WORKING DURING REIMBURSABLE OVERTIME PERIODS
- The DMs, or their designees, are to assign IPP to perform reimbursable overtime service in accordance with the Labor Management Agreement and work assignment policies.
- IPP working overtime are to calculate the time charged, including time traveled between establishments on an equitable basis among the individual establishments. If IPP have questions about how to charge for reimbursable services, they are to direct those questions to their supervisor.
- Supervisors are to instruct IPP to charge a quarter hour minimum charge for reimbursable overtime services and to charge additional reimbursable time in quarter hour increments;
- Supervisors are to instruct IPP to charge a 2-hour minimum charge for reimbursable services during overtime callback situations. A callback occurs when an establishment requests that IPP work during overtime periods that require IPP to return to or travel to the establishment after they have completed their tour of duty, have traveled home, and the supervisor has instructed the inspector to return for the callback coverage; and
- Supervisors are to instruct IPP when travel time associated with an overtime coverage assignment is reimbursable.
- The DM or their designees are to make a reasonable effort to provide all requested reimbursable overtime services; however, the DM or their designees may deny overtime inspection services beyond the approved hours of operations when resources are not available. In some cases, to ensure the efficient and effective use of IPP in official establishments as directed by 9 CFR 307.4 and 381.37, the DM may, after giving prior notice to the establishment that explains the basis for the action, rescind approval where the hours of operation for establishments in an assignment result in frequent non-reimbursable overtime and request that establishments resubmit operating schedules for approval.
- QUESTIONS
- IPP are to first seek guidance from their immediate supervisor for any questions associated with overtime schedules or supervisory decisions that require overtime inspection. IPP are to refer establishment appeals of overtime charges to their supervisor.
- Refer questions regarding this directive to your supervisor or if needed to the Office of Policy and Program Development through askFSIS or by telephone at 1-800-233-3935. When submitting a question, complete the web form and select General Inspection Policy inquiry type.
NOTE: Refer to FSIS Directive 5620.1, Using askFSIS, for additional information on submitting questions.